Flexible Service Processor (FSP) boot fail support
Learn about the FSP boot fail support.
After a boot failure, the FSP reaches the STANDBY stage. If the FSP does not stay up for at least 15 minutes after reaching the STANDBY state, the operator panel displays SRC B1817212. If the FSP takes continuous resets within 15 minutes, then as part of fourth reset (within 15 minutes), the FSP boot process terminates. During this state, the operation panel will configure the Power button as pin hole reset button and the rest of the buttons will be disabled including the pin hole reset button.
Data | Action or description |
---|---|
|
SRC B1817212 signifies that there is a boot fail and the count followed by the System Reference Code (SRC) shows the number of pulse counts before the failure happened. |