Read about new or significantly changed information in
Managing the HMC since the previous update of this topic collection.
This topic highlights some of the new features and functions on
the HMC. For more information, click HMC Readme from the HMC
workplace Welcome pane.
April 2014
The following
updates have been made to the content:
- As of Version 7.9, or later, the systems management for servers
supports single root I/O virtualization (SR-IOV) logical ports. See
the updated Properties topic.
- As of Version 7.9, or later, systems management for partition
supports SR-IOV logical ports. See the new SR-IOV Logical Ports topic and the updated Properties topic.
October 2013
The
following updates have been made to the content:
- As of Version 7.8, or later, the HMC server supports the Dynamic
Platform Optimization capability. See the updated Properties topic.
- As of Version 7.8, or later, the schedule operation for server
supports monitoring and performing the Dynamic Platform Optimization
capability. See the updated Schedule Operations topic.
- As of Version 7.8, or later, the HMC server supports the Systems
Management for Power® Enterprise Pool functions.
See the new Systems Management for Power Enterprise Pool topic.
March 2013
The following
updates have been made to the content:
- As of Version 7.7, or later, you can install a Virtual I/O Server
(VIOS) on a logical partition from an HMC by using a DVD, a saved
image, or a Network Installation Management (NIM) server. See the
updated Activate topic.
- As of Version 7.7, or later, you can store the VIOS images from
a DVD, a saved image, or a Network Installation Management (NIM) server
on the HMC. See the new Managing the Virtual I/O Server image repository topic.
- As of Version 7.7, or later, you can enable the Virtual Server
Network (VSN) on POWER7® processor-based
servers. See the updated Properties topic.
- The following topics were updated for upgrading the Licensed Internal
Code (LIC) by using the HMC:
October 2012
The
following updates have been made to the content:
- With HMC Version 7.6, or later, you can view the Peripheral Component Interconnect Express
(PCIe) hardware topology for the selected POWER7 processor-based servers. The PCIe Hardware Topology topic was added.
- With HMC Version 7.6, or later, you can set the processing units
to the lowest supported value of 0.05 processor per virtual processor.
See the updated Properties topic.
- With HMC Version 7.6, or later, you can restore critical backup
data by using a Secure Shell File Transfer Protocol (SFTP) server.
See the updated Restore HMC Data topic.
- HMC Version 7.6 supports Microsoft Internet
Explorer 6.0 - Microsoft Internet
Explorer 9.0, and Mozilla Firefox Version 4 - Mozilla Firefox Version
10. See the updated Web browser requirements topic.
October 2011
The
following updates have been made to the content:
- With HMC Version 7.4, or later, you can enable the Virtual Trusted
Platform Module (VTPM) on POWER7 processor-based
servers. The Properties topic
was updated for the VTPM feature.
May 2011
The following
updates have been made to the content:
- With the HMC Version 7.2, or later, you can suspend a logical
partition with its operating system and applications, and store the
virtual server state to persistent storage. You can resume the operation
of the logical partition on the same system. The Suspend operations topic is new for logical partitions
with the partition suspend and resume capability.
- With the HMC Version 7.2, or later, the system administrators
can set password restrictions by activating the enhanced password
policy. You can also create and activate the user-defined policy to
set password restrictions. For more information, see Enhanced password policy.
September 2010
- Added information for the IBM® Power 710 Express and IBM Power 730 Express (8231-E2B), IBM Power 720 Express (8202-E4B), IBM Power 740 Express (8205-E6B),
and IBM Power 795 (9119-FHB) servers.
February 2010
- Added information for IBM Power Systems™ servers
that contain the POWER7 processor.